�� HYXiPOWER HYX-E50-H3 High Voltage Battery 5.12kWh Capacity | 102.4V Nominal Voltage | LiFePO₄ Technology | Stackable Design The HYXiPOWER HYX-E50-H3 is a high-voltage lithium-ion battery storage system designed for residential and commercial energy management. Featuring safe LiFePO₄ chemistry, 5.12kWh nominal energy, and IP65 weatherproof construction, this wall-mountable battery integrates seamlessly with solar inverter systems to maximize self-consumption, provide backup power, and optimize energy costs. With 6000 cycle life and scalable parallel connectivity, the HYX-E50-H3 delivers long-term reliability for modern energy independence. �� Key Features: �� 5.12kWh Usable Energy Capacity — Provides 4.6kWh of usable power for daily energy shifting, backup storage, and maximizing solar self-consumption -1-2. ⚡ High-Voltage 102.4V Architecture — Optimized for modern hybrid inverters with 86.4V to 115.2V operating range for efficient power conversion -2. ��️ LiFePO₄ Battery Chemistry — Lithium Iron Phosphate technology delivers superior thermal stability, zero risk of thermal runaway, and the highest safety standards -1. �� 6000 Deep Cycle Life — Industry-leading 6000 charge cycles at 90% depth of discharge, providing 10 years of reliable service -1-2. �� IP65 Weatherproof Enclosure — Dust-tight and water-resistant design allows for both indoor and outdoor installation without additional enclosures -1-2. �� Scalable Parallel Connectivity — Supports multiple batteries in parallel for system expansion, with master-slave configuration for larger energy storage needs -2. �� Smart BMS Integration — Advanced Battery Management System monitors cell voltages, temperatures, and state of charge with comprehensive protection features -1. �� Multiple Communication Protocols — Supports CAN and RS485 communication for seamless integration with leading inverter brands -1-2. �� Space-Saving Wall-Mount Design — Compact dimensions (185.7 × 535 × 498 mm) with flexible wall or floor mounting options -1-2. ��️ Wide Operating Temperature Range — Discharge from -20°C to 55°C with charging from 0°C to 55°C for year-round performance -1-2. �� Modular Expandability — Start with one unit and expand up to multiple parallel units as energy needs grow -2. ✅ 5-Year Product Warranty — Comprehensive warranty coverage for peace of mind and long-term investment protection -1. ⚙️ Technical Specifications: Specification Details Model Number HYX-E50-H3 -1-2 Battery Chemistry LiFePO₄ (Lithium Iron Phosphate) -1-2 Nominal Energy 5.12 kWh -1-2 Usable Capacity 4.6 kWh (90% DOD) -1-2 Nominal Voltage 102.4 V -1-2 Operating Voltage 86.4 ~ 115.2 V -2 Max Charge/Discharge Current 30 A -1 Max Charge/Discharge Power Approx. 3 kW -2 Round-Trip Efficiency >95% -2 Cycle Life 6000 cycles @ 90% DOD -1-2 Dimensions (W×H×D) 185.7 × 535 × 498 mm (7.3 × 21.1 × 19.6 inches) -1-2 Weight 56 kg (123.5 lbs) -1-2 Ingress Protection IP65 (dust-tight and water-resistant) -1-2 Installation Options Wall-mounted or floor-mounted -2 Communication Protocols CAN, RS485 -1-2 Operating Temperature (Charge) 0°C to 55°C -1 Operating Temperature (Discharge) -20°C to 55°C -1 Max Operating Altitude 3000 m -1 Cooling Method Natural convection (no fan noise) -2 Warranty 5 years -1 �� System Components & Interfaces: Component Description Power Switch Front-panel ON/OFF control for safe system operation -2 BAT / BAT- Sockets High-voltage positive and negative quick-connect terminals for inverter connection -2 COM INV Port RJ45 communication port for inverter integration (CAN protocol) -2 COM Parallel Port RJ45 port for daisy-chaining multiple batteries in parallel configurations -2 BMS SOC LED Indicators 5-LED display showing state of charge and system status in real-time -2 BMS Status LED Multi-color LED (Green/Red/Blue) indicating operational mode, standby, or alarm conditions -2 Ground Terminal Secure grounding point for electrical safety compliance -2 Explosive-Proof Valve Pressure relief mechanism for extreme fault conditions -2 �� Installation & Safety Requirements: �� Two-Person Lift Required — Unit weighs 56kg; always use two or more people for safe handling and installation -2-3. �� Professional Installation Only — Must be installed by qualified personnel trained in high-voltage battery systems and familiar with safety protocols -2. �� Protective Equipment Required — Installers must wear insulated gloves, safety goggles, and protective clothing during handling and wiring -2-3. �� Structural Mounting — Ensure wall or floor mounting surface can support the battery’s full weight with appropriate anchors and fixings -2. ⚡ Pre-Wiring Verification — Double-check all connections before power-on; one person wires while another supervises to prevent short circuits -3. �� Storage Requirements — If not used within 3 months, charge to 100% to prevent over-discharge from self-consumption -2. �� System Status LED Indicators: LED Pattern WORK (Blue) ALARM (Red) System Status All LEDs follow SOC Off Off Shutdown mode -2 According to power display On Off Normal operation -2 According to power display Flashing (0.5s on/1.5s off) Off Standby/idle -2 According to power display On Flashing Warning condition -2 According to power display Off On Alarm/fault condition -2 �� Ideal For: �� Residential Solar Storage — Store excess solar energy for nighttime use, maximizing self-consumption and reducing grid dependence ⚡ Peak Shaving & Load Shifting — Charge during off-peak rates and discharge during peak pricing to optimize electricity costs �� Backup Power Protection — Provide seamless backup for critical loads during grid outages (requires compatible hybrid inverter) �� New Solar Installations — Perfect companion for new solar storage systems seeking high-voltage battery compatibility �� Small Commercial Applications — Ideal for businesses wanting to reduce demand charges and improve energy resilience �� System Expansion Projects — Start with single unit and expand capacity as energy needs grow with parallel connectivity �� Off-Grid & Self-Consumption — Essential component for off-grid systems or properties pursuing energy independence �� Multi-Unit Installations — Stack multiple HYX-E50-H3 units for larger capacity requirements up to several dozen kWh �� Compatibility Note: The HYX-E50-H3 is designed to work with high-voltage hybrid inverters supporting 100V battery banks. Always verify inverter compatibility before purchase. Communication typically uses CAN protocol with RJ45 connection -2. �� Expansion Capability: Multiple HYX-E50-H3 units can be connected in parallel to increase total capacity. In parallel configurations, one battery acts as the master communicating with the inverter while slaves follow via daisy-chain communication -2. ⚠️ Important Safety Information: This high-voltage battery system requires professional installation by qualified personnel. Never attempt to open the battery enclosure or service internal components — no user-serviceable parts inside. Always follow local electrical codes and regulations -2. 3 web pages Categories: HyxiPower, New & Special Offers, New Products, Top Brands
